Street lighting

DELFIN 03

The product DELFIN-03 having an elegant rounded shape comes to satisfy the exigencies of modern street lighting.

It could be equipped with light sources from 50W to 250W function of the lighting demands. The glass fibre reinforced polyamide body offers a high durability and an excellent resistance against the debasing action of the water, solar light and wind.

Learn more about the product

The facetted reflector ensures an efficient light distribution. Also DELFIN-03 has low installation and maintenance costs, and that recommends it as a good solution for road lighting.

  • A modern design, agreeable, with rounded shapes that give an elegant aspect to the installation also during daytime.
  • With a reduced number of luminaires there could be realized a high performance lighting system that leads to important savings both for the initial investment and for the energy consumption during exploitation.
  • Body from glass fibre reinforced polyamide, equipped with anticondense filter.
  • Reflector: Pressed aluminium sheet, with facets optimised on computer in order to obtain optimal photometric performances. o The possibility to equip the luminaire with a specialised reflector for pedestrian crossings.
  • Optical system o Multiple possibilities of lamp position adjustment referring to the reflector:
  • horizontal movement in 8 positions
  • vertical movement in 5 positions, that leads to multiple light intensity distributions, adapted to different needs (arrangements geometries), according to the lighting classes from the Road lighting standard EN 13201.
  • Electrical equipment. Multiple variants:: o fuse (SF), o “ chronosense” controller to switch to reduced power consumption during the time intervals when the traffic is reduced (variant RF ) = flux dimming, o power range: 250W, 150W or 100W, o insulation class I (with earth conductor) or o insulation class II (with separator that disconnect the electric gear and the socket on the luminaire opening). o capacitor for power factor compensation cosφ: min. 0.92.
  • Gear board: o On request: variant without gear board. o Removable (AP), with fast dismantling, without special tools.
  • Aluminium alloy spigot and metallic strap for fastening on pole that allows the luminiare to be fixed: side entry for console (on horizontal bracket) or on post top.
  • Colour: grey.

Application

The luminaire is designed for road lighting: highways, main roads, local roads, secondary roads, intersections, pedestrian crossings. It is also recommended for lighting public large spaces: parks, alleys, seaside, parkings, railway-stations, bus stations and so on.

Light sources

  • High pressure sodium tubular lamps HST socket E40:250W,150W,100W.
  • Metal halide tubular lamps HIT socket E40: 250W (HPI-T), 150W (HPI-T), 100W (CDO-TT).
  • High pressure mercury lamp HME (HG) socket E27: 125W.
  • High pressure sodium tubular lamps HST socket E27: 50W, 70W.
  • Metal halide tubular lamps HIT socket E27: 70W (CDO-TT).

Compliance

Conformitate

Close additional information

Choose model
Name DELFIN-03-70
Assembly type On poles
Types of gear Adjustable, Electromagnetic ballast, Electronical ballast
Light distribution Direct distribution
Type of lamp High-pressure sodium vapor lamps, HST (E27; E40)
Power from 20 to 100
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 1×70
Power factor cos φ  min. 0,92
Class of protection against electric shock I
Weight [Kg] 6,4

 

Product type L [mm] l [mm] h [mm] m [mm]
DELFIN-03 817 311 287 Ф46 – Ф62 mm

Mounting

  • Aluminium alloy spigot and metallic strap for fastening on pole that allows the luminiare to be fixed:
    • side entry for console (on horizontal bracket Ø46mm… Ø62mm )
    • post top (on vertical mounting unit Ø62mm).
  • On both situations the fastening system allows:
    • the horizontal positioning of the luminaire,
    • a tilted positioning of the luminaire.

Variants on request

  • On request the product could be equipped with:
    • specialised reflector for pedestrian crossings.
    • flat clear glass diffuser (GLASS variants).
  • Electrical equipment. Multiple variants: o fuse (SF),
    • “chronosense” controller to switch to reduced power consumption during the time intervals when the traffic is reduced (variant RF),
    • electronic ballast with dimming and DALI protocol
    • lamp power range 125W, 70W, 50W,
    • insulation class I (with earth conductor) or
    • insulation class II (with separator that disconnect the electric gear and the socket on the
      luminaire opening)
  • Multiple possibilities of lamp position adjustment referring to the reflector, that leads to different light intensity distributions.
  • Variants without gear board.
  • Removable (AP), with fast dismantling, without special tools.

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C…+ 35 ̊C.
  • Average relative humidity until 80% at the average temperature of + 20°C
  • Mechanical impact resistance: IK10
  • Resistance to flame and ignition test: 650 ̊C
  • The luminaire is manufactured according to the standards: SR EN 60598-1, SR EN 60598-2-3.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie

Photometric data DELFIN-03-250 HST E2
Light distribution diagram [Cd/1000lm]

Photometric data DELFIN-03-150 HST H0
Light distribution diagram [Cd/1000lm]

Name DELFIN-03-100
Assembly type On poles
Types of gear Adjustable, Electromagnetic ballast, Electronical ballast
Light distribution Direct distribution
Type of lamp High-pressure sodium vapor lamps, HST (E27; E40)
Power from 100 to 2000
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 1×100
Power factor cos φ  min. 0,92
Class of protection against electric shock I
Weight [Kg] 6,6

 

Product type L [mm] l [mm] h [mm] m [mm]
DELFIN-03 817 311 287 Ф46 – Ф62 mm

Mounting

  • Aluminium alloy spigot and metallic strap for fastening on pole that allows the luminiare to be fixed:
    • side entry for console (on horizontal bracket Ø46mm… Ø62mm )
    • post top (on vertical mounting unit Ø62mm).
  • On both situations the fastening system allows:
    • the horizontal positioning of the luminaire,
    • a tilted positioning of the luminaire.

Variants on request

  • On request the product could be equipped with:
    • specialised reflector for pedestrian crossings.
    • flat clear glass diffuser (GLASS variants).
  • Electrical equipment. Multiple variants: o fuse (SF),
    • “chronosense” controller to switch to reduced power consumption during the time intervals when the traffic is reduced (variant RF),
    • electronic ballast with dimming and DALI protocol
    • lamp power range 125W, 70W, 50W,
    • insulation class I (with earth conductor) or
    • insulation class II (with separator that disconnect the electric gear and the socket on the
      luminaire opening)
  • Multiple possibilities of lamp position adjustment referring to the reflector, that leads to different light intensity distributions.
  • Variants without gear board.
  • Removable (AP), with fast dismantling, without special tools.

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C…+ 35 ̊C.
  • Average relative humidity until 80% at the average temperature of + 20°C
  • Mechanical impact resistance: IK10
  • Resistance to flame and ignition test: 650 ̊C
  • The luminaire is manufactured according to the standards: SR EN 60598-1, SR EN 60598-2-3.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie

Photometric data DELFIN-03-250 HST E2
Light distribution diagram [Cd/1000lm]

Photometric data DELFIN-03-150 HST H0
Light distribution diagram [Cd/1000lm]

Name DELFIN-03-150
Assembly type On poles
Types of gear Adjustable, Electromagnetic ballast, Electronical ballast
Light distribution Direct distribution
Type of lamp High-pressure sodium vapor lamps, HST (E27; E40)
Power from 100 to 2000
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 1×150
Power factor cos φ  min. 0,92
Class of protection against electric shock I
Weight [Kg] 6,6

 

Product type L [mm] l [mm] h [mm] m [mm]
DELFIN-03 817 311 287 Ф46 – Ф62 mm

Mounting

  • Aluminium alloy spigot and metallic strap for fastening on pole that allows the luminiare to be fixed:
    • side entry for console (on horizontal bracket Ø46mm… Ø62mm )
    • post top (on vertical mounting unit Ø62mm).
  • On both situations the fastening system allows:
    • the horizontal positioning of the luminaire,
    • a tilted positioning of the luminaire.

Variants on request

  • On request the product could be equipped with:
    • specialised reflector for pedestrian crossings.
    • flat clear glass diffuser (GLASS variants).
  • Electrical equipment. Multiple variants: o fuse (SF),
    • “chronosense” controller to switch to reduced power consumption during the time intervals when the traffic is reduced (variant RF),
    • electronic ballast with dimming and DALI protocol
    • lamp power range 125W, 70W, 50W,
    • insulation class I (with earth conductor) or
    • insulation class II (with separator that disconnect the electric gear and the socket on the
      luminaire opening)
  • Multiple possibilities of lamp position adjustment referring to the reflector, that leads to different light intensity distributions.
  • Variants without gear board.
  • Removable (AP), with fast dismantling, without special tools.

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C…+ 35 ̊C.
  • Average relative humidity until 80% at the average temperature of + 20°C
  • Mechanical impact resistance: IK10
  • Resistance to flame and ignition test: 650 ̊C
  • The luminaire is manufactured according to the standards: SR EN 60598-1, SR EN 60598-2-3.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie

Photometric data DELFIN-03-250 HST E2
Light distribution diagram [Cd/1000lm]

Photometric data DELFIN-03-150 HST H0
Light distribution diagram [Cd/1000lm]

Name DELFIN-03-250
Assembly type On poles
Types of gear Adjustable, Electromagnetic ballast, Electronical ballast
Light distribution Direct distribution
Type of lamp High-pressure sodium vapor lamps, HIT (E27; E40), HST (E27; E40)
Power from 100 to 2000
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 1×250
Power factor cos φ  min. 0,92
Class of protection against electric shock I
Weight [Kg] 8,5

 

Product type L [mm] l [mm] h [mm] m [mm]
DELFIN-03 817 311 287 Ф46 – Ф62 mm

Mounting

  • Aluminium alloy spigot and metallic strap for fastening on pole that allows the luminiare to be fixed:
    • side entry for console (on horizontal bracket Ø46mm… Ø62mm )
    • post top (on vertical mounting unit Ø62mm).
  • On both situations the fastening system allows:
    • the horizontal positioning of the luminaire,
    • a tilted positioning of the luminaire.

Variants on request

  • On request the product could be equipped with:
    • specialised reflector for pedestrian crossings.
    • flat clear glass diffuser (GLASS variants).
  • Electrical equipment. Multiple variants: o fuse (SF),
    • “chronosense” controller to switch to reduced power consumption during the time intervals when the traffic is reduced (variant RF),
    • electronic ballast with dimming and DALI protocol
    • lamp power range 125W, 70W, 50W,
    • insulation class I (with earth conductor) or
    • insulation class II (with separator that disconnect the electric gear and the socket on the
      luminaire opening)
  • Multiple possibilities of lamp position adjustment referring to the reflector, that leads to different light intensity distributions.
  • Variants without gear board.
  • Removable (AP), with fast dismantling, without special tools.

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C…+ 35 ̊C.
  • Average relative humidity until 80% at the average temperature of + 20°C
  • Mechanical impact resistance: IK10
  • Resistance to flame and ignition test: 650 ̊C
  • The luminaire is manufactured according to the standards: SR EN 60598-1, SR EN 60598-2-3.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie

Photometric data DELFIN-03-250 HST E2
Light distribution diagram [Cd/1000lm]

Photometric data DELFIN-03-150 HST H0
Light distribution diagram [Cd/1000lm]

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro