Recessed

FIDI-02-1xT8 Cristal

The luminaires from FIDI-02 range of products offers a versatile and ergonomic solution for indoor lighting.

They were designed for line-up recessed mounting in order to realize a luminous line. It is a product with modern lines that adds a pleasant note to the spaces where it is installed.

Learn more about the product

  • Steel sheet body white painted with powder
  • Transparent patterned PMMA diffuser (PMP)
  • Gear (ballast) included in the product and manufactured according to the specific standards
  • Colour: white

Application

  • General indoor lighting: commercial areas, rooms with computers monitors. Emergency lighting with one fluorescent tube (1x36W).

Light sources

  • Tubular fluorescent lamp T8 Ø26mm, socket G13

Compliance

Certificat conformitate FIDI-02 1xT8

Close additional information

Choose model
Name FIDI-02-118 PMP
Assembly type Recessed in the ceiling
Types of gear Efficient, Electromagnetic ballast, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp Fluorescent lamps, T8 Ø26 (G13)
Power from 1 to 20
Number of sources 1
Level of protection IP40
Rated voltage [V] 230
Rated power [W] 1×18
Power factor cos φ  min. 0.92
Class of protection against electric shock I
Weight [Kg] 2,40
Product type L (mm) L1 (mm) l (mm) H (mm) m (mm) n (mm)
FIDI-02-118 Cristal 614 400 142 93 600 125
FIDI-02-136 Cristal 1225 800 142 93 1200 125

Variants on request

  • On request the luminaire could be equipped with:
    • white opal PMMA diffuser with high transmission (τ =80%) (PMO).
    • high performance electronic ballast HFP,
    • standard electronic ballast HFS or o dimmable electronic ballast HFR (protocol 1-10V/ DALI) (1x36W)
    • emergency lighting kit for 3 hours (3H) or 1 hour (1H). (1x36W).
    • connector type Wieland GST 18i3 male CS1 o connector Push-In PI
    • with 2 fluorescent tubes T5-28W (var. 1200mm)
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 8% from the nominal lamp flux.
  • Note: The options could be combined function of the client request.

Mounting

  • Recessed in modular ceilings with the cut-out width of 125mm, in line in order to realize a luminous line.
  • Visible against the surface of the false ceiling (4-16mm).
  • Modular false ceiling dimensions 600×125 (FIRI-02-118), 1200×125(FIRI-02-136).

Technical features

  • Rated voltage: 230V/50Hz
  • Surrounding temperature: -5 ̊C ÷ + 35 ̊C
  • Relative humidity: till 80% at the temperature of + 20 ̊C
  • Saline fog: 48 hours according to SR EN 60068-2-11
  • Mechanical impact resistance: IK07
  • Jolt resistance according to SR EN 60068-2-29: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standards SR EN 60598-1, SR EN 60598-2-2.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Date fotometrice FIDI-02 1xT8

Photometric data FIDI-02-136 PMP

CIE:56 84 96 100 52
UTE: 0.52D
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv19.1 UGRlong18.7)
Light distribution diagram [Cd/1000lm]

Name FIDI-02-136 PMP
Assembly type Recessed in the ceiling
Types of gear Adjustable, Efficient, Electromagnetic ballast, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp Fluorescent lamps, T8 Ø26 (G13)
Power from 20 to 100
Number of sources 1
Level of protection IP40
Options for emergency light 1 hour
Rated voltage [V] 230
Rated power [W] 1×18
Power factor cos φ  min. 0.92
Class of protection against electric shock I
Weight [Kg] 2,40
Product type L (mm) L1 (mm) l (mm) H (mm) m (mm) n (mm)
FIDI-02-118 Cristal 614 400 142 93 600 125
FIDI-02-136 Cristal 1225 800 142 93 1200 125

Variants on request

  • On request the luminaire could be equipped with:
    • white opal PMMA diffuser with high transmission (τ =80%) (PMO).
    • high performance electronic ballast HFP,
    • standard electronic ballast HFS or o dimmable electronic ballast HFR (protocol 1-10V/ DALI) (1x36W)
    • emergency lighting kit for 3 hours (3H) or 1 hour (1H). (1x36W).
    • connector type Wieland GST 18i3 male CS1 o connector Push-In PI
    • with 2 fluorescent tubes T5-28W (var. 1200mm)
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 8% from the nominal lamp flux.
  • Note: The options could be combined function of the client request.

Mounting

  • Recessed in modular ceilings with the cut-out width of 125mm, in line in order to realize a luminous line.
  • Visible against the surface of the false ceiling (4-16mm).
  • Modular false ceiling dimensions 600×125 (FIRI-02-118), 1200×125(FIRI-02-136).

Technical features

  • Rated voltage: 230V/50Hz
  • Surrounding temperature: -5 ̊C ÷ + 35 ̊C
  • Relative humidity: till 80% at the temperature of + 20 ̊C
  • Saline fog: 48 hours according to SR EN 60068-2-11
  • Mechanical impact resistance: IK07
  • Jolt resistance according to SR EN 60068-2-29: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standards SR EN 60598-1, SR EN 60598-2-2.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive.

Date fotometrice FIDI-02 1xT8

Photometric data FIDI-02-136 PMP

CIE:56 84 96 100 52
UTE: 0.52D
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv19.1 UGRlong18.7)
Light distribution diagram [Cd/1000lm]

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro