Humidity and dust protected

FIPAD-05-2xT8 Danubis

The luminaire FIPAD-05 with hermetic PC diffuser is ideal for use in harsh environments where protection against vapour, water, and dust is required.

Its compact and economical design provides perfect integration with the environment. The IP65 protection means for FIPAD-05, waterproof PC diffuser, sealing gasket and stainless steel clips, enable it to be used in damp places such as in industry, warehouses, garages, etc.

Learn more about the product

The product is easy to install and maintain and has adjustable ceiling clips to make installation even more flexible and practical.

  • Housing: Light grey polyester reinforced with glass fibre body, corrosion, moisture and acid resistant.
  • Impact resistant clear polycarbonate (PC) or PMMA (PMMA), diffuser, with interior prismatic structure for optimal distribution of the light.
  • Plastic clips for fastening the diffuser, that remains attached to the body.
  • Polyurethane foam sealing gasket.
  • Gear rail made of steel sheet painted with polyester white powder.
  • Sockets made of polycarbonate.
  • Supply wire diameter: Φ8 ÷ Φ12 mm.
  • Gear (ballast) included in the product and manufactured according to the specific standards.
  • Colour: grey.

Application

General indoor for humid environments with incombustible dust: swimming pools, bathrooms, industrial halls, warehouses. Covered outdoor areas (with roofs that protect the luminaires against solar rays): railway stations, bus stations, waiting halls, garages, underground parkings, subway tunnels, covered storage areas, tunnels, subways, corridors, staircases. Emergency lighting for evacuation with one fluorescent tube.

Light source

  • Fluorescent tube T8 (26mm) G13.
  • LED tubes (ø26mm) socket G13, 59cm with power of min.8W, 120cm with power of 16W, 150cm with power of 20W, with the same length as the fluorescent tubes T8 18W/36W/58W.

Advantages

Economical, compact luminaire designed for use in harsh environments where robustness and performance are key features. It is the best option for damp areas. It has easy installation and maintenance. Complies in full with the standards for IP65 protection – provides protection against dust and moisture. High mechanical impact resistance IK08 when equipped with PC diffuser (PC diffuser IK10).

Compliance

348-FIPAD-05-2xT8_218_236_258_Danubis_&-tub-LED-59cm_120cm_150cm-_Ed15sn-certificat

 

Close additional information

Choose model
Name FIPAD-05-218 DANUBIS
Assembly type Recessed, Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Adjustable, Efficient, Electromagnetic ballast, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp Fluorescent lamps, T8 Ø26 (G13)
Power from 1 to 20
Number of sources 2
Level of protection IP65
Rated voltage [V] 230
Rated power [W] 2×18
Power factor cos φ  ≥0,92
Class of protection against electric shock I
Weight [Kg] 1,80

 

Product type A (mm) B (mm) C (mm) l (mm) h (mm)
FIPAD-05-218 DANUBIS FIPAD-05-2xmin.8W LED (59cm) 669 460 360 116 99
FIPAD-05-236 DANUBIS FIPAD-05-2xmin.16W LED (120cm) 1277 800 700 116 99
FIPAD-05-258 DANUBIS FIPAD-05-2xmin.20W LED (150cm) 1577 1100 1000
116
99

 

Variants on request

  • On request the variant with fluorescent tubes could be equipped with:
    • high performance electronic ballast HFP or standard electronic ballast HFS,
    • mirrored reflector (RO),
    • stainless steel (Inox Clips).
    • emergency lighting kit (EM = emergency) for 1 hour or 3 hours (1H/3H) (var36W, 58W). o increased protection kit IP66.
    • fast connection kit (PI) – (1 pcs. Push In connector / product)
    • fast fixing kit for suspended mounting(2 pcs. clips+hanger/ product) o through wiring grommets for both ends.
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 7% from the nominal lamp flux.
  • Note. The options could be combined function of the customer request.

Mounting

  • Visible or suspended (inclusive on normal inflammable surfaces, F marking).
  • When the luminaires are exposed to regular contacts with chemicals suspended in atmosphere please contact the manufacturer for advice.

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature: -5 ̊C ÷ + 35 ̊C.
  • Relative humidity: till 93% at the temperature of + 25 ̊C.
  • Glow-wire test: 960 ̊C
  • Mechanical impact resistance: IK08 luminaire body, IK06 PMMA diffuser, IK10 polycarbonate diffuser (PC).
  • Saline fog: 48 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie FIPAD-05-2xT8_218_236_258_Danubis_&-tub-LED-59cm_120cm_150cm-_Ed15sn

Photometric data FIPAD-05-136 DANUBIS

CIE: 39 68 88 86 68
UTE: 0.58G+0.10T
Light distribution diagram [Cd/1000lm]

Name FIPAD-05-236 DANUBIS
Assembly type Recessed, Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Adjustable, Efficient, Electromagnetic ballast, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp Fluorescent lamps, T8 Ø26 (G13)
Power from 20 to 100
Number of sources 2
Level of protection IP65
Options for emergency light 1 hour, 3 hours
Rated voltage [V] 230
Rated power [W] 2×36
Power factor cos φ  ≥0,92
Class of protection against electric shock I
Weight [Kg] 2,95

 

Product type A (mm) B (mm) C (mm) l (mm) h (mm)
FIPAD-05-218 DANUBIS FIPAD-05-2xmin.8W LED (59cm) 669 460 360 116 99
FIPAD-05-236 DANUBIS FIPAD-05-2xmin.16W LED (120cm) 1277 800 700 116 99
FIPAD-05-258 DANUBIS FIPAD-05-2xmin.20W LED (150cm) 1577 1100 1000
116
99

 

Variants on request

  • On request the variant with fluorescent tubes could be equipped with:
    • high performance electronic ballast HFP or standard electronic ballast HFS,
    • mirrored reflector (RO),
    • stainless steel (Inox Clips).
    • emergency lighting kit (EM = emergency) for 1 hour or 3 hours (1H/3H) (var36W, 58W). o increased protection kit IP66.
    • fast connection kit (PI) – (1 pcs. Push In connector / product)
    • fast fixing kit for suspended mounting(2 pcs. clips+hanger/ product) o through wiring grommets for both ends.
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 7% from the nominal lamp flux.
  • Note. The options could be combined function of the customer request.

Mounting

  • Visible or suspended (inclusive on normal inflammable surfaces, F marking).
  • When the luminaires are exposed to regular contacts with chemicals suspended in atmosphere please contact the manufacturer for advice.

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature: -5 ̊C ÷ + 35 ̊C.
  • Relative humidity: till 93% at the temperature of + 25 ̊C.
  • Glow-wire test: 960 ̊C
  • Mechanical impact resistance: IK08 luminaire body, IK06 PMMA diffuser, IK10 polycarbonate diffuser (PC).
  • Saline fog: 48 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie FIPAD-05-2xT8_218_236_258_Danubis_&-tub-LED-59cm_120cm_150cm-_Ed15sn

Photometric data FIPAD-05-136 DANUBIS

CIE: 39 68 88 86 68
UTE: 0.58G+0.10T
Light distribution diagram [Cd/1000lm]

Name FIPAD-05-258 DANUBIS
Assembly type Recessed, Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Adjustable, Efficient, Electromagnetic ballast, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp Fluorescent lamps, T8 Ø26 (G13)
Power from 20 to 100
Number of sources 2
Level of protection IP65
Options for emergency light 1 hour, 3 hours
Rated voltage [V] 230
Rated power [W] 2×58
Power factor cos φ  ≥0,92
Class of protection against electric shock I
Weight [Kg] 4,20

 

Product type A (mm) B (mm) C (mm) l (mm) h (mm)
FIPAD-05-218 DANUBIS FIPAD-05-2xmin.8W LED (59cm) 669 460 360 116 99
FIPAD-05-236 DANUBIS FIPAD-05-2xmin.16W LED (120cm) 1277 800 700 116 99
FIPAD-05-258 DANUBIS FIPAD-05-2xmin.20W LED (150cm) 1577 1100 1000
116
99

 

Variants on request

  • On request the variant with fluorescent tubes could be equipped with:
    • high performance electronic ballast HFP or standard electronic ballast HFS,
    • mirrored reflector (RO),
    • stainless steel (Inox Clips).
    • emergency lighting kit (EM = emergency) for 1 hour or 3 hours (1H/3H) (var36W, 58W). o increased protection kit IP66.
    • fast connection kit (PI) – (1 pcs. Push In connector / product)
    • fast fixing kit for suspended mounting(2 pcs. clips+hanger/ product) o through wiring grommets for both ends.
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 7% from the nominal lamp flux.
  • Note. The options could be combined function of the customer request.

Mounting

  • Visible or suspended (inclusive on normal inflammable surfaces, F marking).
  • When the luminaires are exposed to regular contacts with chemicals suspended in atmosphere please contact the manufacturer for advice.

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature: -5 ̊C ÷ + 35 ̊C.
  • Relative humidity: till 93% at the temperature of + 25 ̊C.
  • Glow-wire test: 960 ̊C
  • Mechanical impact resistance: IK08 luminaire body, IK06 PMMA diffuser, IK10 polycarbonate diffuser (PC).
  • Saline fog: 48 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie FIPAD-05-2xT8_218_236_258_Danubis_&-tub-LED-59cm_120cm_150cm-_Ed15sn

Photometric data FIPAD-05-136 DANUBIS

CIE: 39 68 88 86 68
UTE: 0.58G+0.10T
Light distribution diagram [Cd/1000lm]

Name FIPAD-05 2XT-LED 1200MM
Assembly type Recessed, Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Light distribution Direct distribution
Type of lamp LED tube
Power from 20 to 100
Number of sources 2
Level of protection IP65
Rated voltage [V] 230
Rated power [W] 2xmin.16
Power factor cos φ 
Class of protection against electric shock I
Weight [Kg] 1,82

 

Product type A (mm) B (mm) C (mm) l (mm) h (mm)
FIPAD-05-218 DANUBIS FIPAD-05-2xmin.8W LED (59cm) 669 460 360 116 99
FIPAD-05-236 DANUBIS FIPAD-05-2xmin.16W LED (120cm) 1277 800 700 116 99
FIPAD-05-258 DANUBIS FIPAD-05-2xmin.20W LED (150cm) 1577 1100 1000
116
99

 

Variants on request

  • On request the variant with fluorescent tubes could be equipped with:
    • high performance electronic ballast HFP or standard electronic ballast HFS,
    • mirrored reflector (RO),
    • stainless steel (Inox Clips).
    • emergency lighting kit (EM = emergency) for 1 hour or 3 hours (1H/3H) (var36W, 58W). o increased protection kit IP66.
    • fast connection kit (PI) – (1 pcs. Push In connector / product)
    • fast fixing kit for suspended mounting(2 pcs. clips+hanger/ product) o through wiring grommets for both ends.
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 7% from the nominal lamp flux.
  • Note. The options could be combined function of the customer request.

Mounting

  • Visible or suspended (inclusive on normal inflammable surfaces, F marking).
  • When the luminaires are exposed to regular contacts with chemicals suspended in atmosphere please contact the manufacturer for advice.

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature: -5 ̊C ÷ + 35 ̊C.
  • Relative humidity: till 93% at the temperature of + 25 ̊C.
  • Glow-wire test: 960 ̊C
  • Mechanical impact resistance: IK08 luminaire body, IK06 PMMA diffuser, IK10 polycarbonate diffuser (PC).
  • Saline fog: 48 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie FIPAD-05-2xT8_218_236_258_Danubis_&-tub-LED-59cm_120cm_150cm-_Ed15sn

Photometric data FIPAD-05-136 DANUBIS

CIE:39 68 88 86 68
UTE: 0.58G+0.10T
Light distribution diagram [Cd/1000lm]

Name FIPAD-05 2XT-LED 1500MM
Assembly type Recessed, Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Light distribution Direct distribution
Type of lamp LED module
Power from 20 to 100
Number of sources 2
Level of protection IP65
Rated voltage [V] 230
Rated power [W] 2xmi.20
Power factor cos φ 
Class of protection against electric shock I
Weight [Kg] 2,35

 

Product type A (mm) B (mm) C (mm) l (mm) h (mm)
FIPAD-05-218 DANUBIS FIPAD-05-2xmin.8W LED (59cm) 669 460 360 116 99
FIPAD-05-236 DANUBIS FIPAD-05-2xmin.16W LED (120cm) 1277 800 700 116 99
FIPAD-05-258 DANUBIS FIPAD-05-2xmin.20W LED (150cm) 1577 1100 1000
116
99

 

Variants on request

  • On request the variant with fluorescent tubes could be equipped with:
    • high performance electronic ballast HFP or standard electronic ballast HFS,
    • mirrored reflector (RO),
    • stainless steel (Inox Clips).
    • emergency lighting kit (EM = emergency) for 1 hour or 3 hours (1H/3H) (var36W, 58W). o increased protection kit IP66.
    • fast connection kit (PI) – (1 pcs. Push In connector / product)
    • fast fixing kit for suspended mounting(2 pcs. clips+hanger/ product) o through wiring grommets for both ends.
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 7% from the nominal lamp flux.
  • Note. The options could be combined function of the customer request.

Mounting

  • Visible or suspended (inclusive on normal inflammable surfaces, F marking).
  • When the luminaires are exposed to regular contacts with chemicals suspended in atmosphere please contact the manufacturer for advice.

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature: -5 ̊C ÷ + 35 ̊C.
  • Relative humidity: till 93% at the temperature of + 25 ̊C.
  • Glow-wire test: 960 ̊C
  • Mechanical impact resistance: IK08 luminaire body, IK06 PMMA diffuser, IK10 polycarbonate diffuser (PC).
  • Saline fog: 48 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie FIPAD-05-2xT8_218_236_258_Danubis_&-tub-LED-59cm_120cm_150cm-_Ed15sn

Photometric data FIPAD-05-136 DANUBIS

CIE: 39 68 88 86 68
UTE: 0.58G+0.10T
Light distribution diagram [Cd/1000lm]

Name FIPAD-05 2XT-LED 600MM
Assembly type Recessed, Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Light distribution Direct distribution
Type of lamp LED tube
Power from 20 to 100
Number of sources 2
Level of protection IP65
Rated voltage [V] 230
Rated power [W] 2xmin.8
Power factor cos φ 
Class of protection against electric shock I
Weight [Kg] 1,37

 

Product type A (mm) B (mm) C (mm) l (mm) h (mm)
FIPAD-05-218 DANUBIS FIPAD-05-2xmin.8W LED (59cm) 669 460 360 116 99
FIPAD-05-236 DANUBIS FIPAD-05-2xmin.16W LED (120cm) 1277 800 700 116 99
FIPAD-05-258 DANUBIS FIPAD-05-2xmin.20W LED (150cm) 1577 1100 1000
116
99

 

Variants on request

  • On request the variant with fluorescent tubes could be equipped with:
    • high performance electronic ballast HFP or standard electronic ballast HFS,
    • mirrored reflector (RO),
    • stainless steel (Inox Clips).
    • emergency lighting kit (EM = emergency) for 1 hour or 3 hours (1H/3H) (var36W, 58W). o increased protection kit IP66.
    • fast connection kit (PI) – (1 pcs. Push In connector / product)
    • fast fixing kit for suspended mounting(2 pcs. clips+hanger/ product) o through wiring grommets for both ends.
  • The variant with emergency lighting with fluorescent lamp (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd 3×1,2V/4Ah that ensure autonomy in emergency mode of 3 hours or 1 hour function of the inverter.
    • The charging time of the accumulators: 12 hours
    • On emergency mode during 1 or 3 hours the luminous flux is maintained to min. 7% from the nominal lamp flux.
  • Note. The options could be combined function of the customer request.

Mounting

  • Visible or suspended (inclusive on normal inflammable surfaces, F marking).
  • When the luminaires are exposed to regular contacts with chemicals suspended in atmosphere please contact the manufacturer for advice.

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature: -5 ̊C ÷ + 35 ̊C.
  • Relative humidity: till 93% at the temperature of + 25 ̊C.
  • Glow-wire test: 960 ̊C
  • Mechanical impact resistance: IK08 luminaire body, IK06 PMMA diffuser, IK10 polycarbonate diffuser (PC).
  • Saline fog: 48 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Fotometrie FIPAD-05-2xT8_218_236_258_Danubis_&-tub-LED-59cm_120cm_150cm-_Ed15sn

Photometric data FIPAD-05-136 DANUBIS

CIE: 39 68 88 86 68
UTE: 0.58G+0.10T
Light distribution diagram [Cd/1000lm]

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro