Humidity and dust protected

FIPAD-06-2X1R2/4/5BX30LED G2

The new luminaire FIPAD-06 LED with watertight polycarbonate diffuser is ideal for use in harsh environments where is required protection against vapour, water, and dust.

The opal diffuser ensures the visual comfort and quality of light. Being equipped with medium power LED modules, FIPAD-06 LED offers both reduced power consumption and low maintenance costs giving the possibility of replacement the fluorescent solutions without compromising the colour of the light.

Learn more about the product

The compact and economical design provides perfect integration with the environment. The IP66 protection means for FIPAD-06 LED sealing gasket and stainless steel clips and enable it to be used in damp places such as in industry, warehouses, and sport areas.

Description

  •  Light grey polycarbonate body, UV stable, resistant to impact, dust and moisture.
  • Translucent polycarbonate diffuser for an optimal light distribution.
  • White painted steel sheet gear rail.
  • Polyamide with glass fibre clips that remains attached to the body when the luminaire is open.
  • Polyurethane foam sealing gasket.
  • The luminaire has a connector on one end, and a sealing gasket on the other end.
  • Supply wire diameter: Φ8 ÷ Φ12 mm.
  • Distance part made of polyamide with glass fibre.
  • 3 poles serial terminal.
  • Accessories included in the product: fast connector with 3 poles, screws and stainless steel clips
    and brackets for visible mounting on ceiling, and brackets and stainless steel hooks for suspended
    mounting.
  • Gear (electronic driver) included in the product and manufactured according to the specific
    standards.
  • Colour grey.

Application

General indoor for humid environments with incombustible dust: industrial halls, warehouses, sport areas, workshops. Covered outdoor areas (only under roofs, covers, cupolas that protect the luminaires against solar rays): railway stations, bus stations, waiting halls, garages, underground parkings, subway tunnels, covered storage areas, tunnels, subways, corridors, staircases.) Emergency lighting for evacuation with 2Bx30LED for the variants FIPAD 1200mm, 1500mm+ KIT EM.

Light source

  • Power LEDs, colour temperature or neutral-white 4000K lifetime L80B10 of 60,000 hours at Ta=25 C, CRI≥80.
  • On request the product could be equipped with LEDs with colour temperature cool-white day-light 6500K, CRI: 70 or warm-white 3000K CRI:90.
  • The LED system included in the product could replace or is equivalent with fluorescent lamp T8 Ø26mm, T5 Ø16mm.

Advantages

Economical, compact luminaire designed for use in harsh environments where robustness and performance are key features. Operates exclusively with LED, making it the best option for damp areas. Energy savings. It has easy installation and maintenance. Complies in full with the standards for IP65 protection – provides protection against dust and moisture and has high impact resisance IK08.. Reduced maintenance costs. There are not necessary interventions for lamp replacements during exploitation.

Compliance

Close additional information

Choose model
Name FIPAD-06-2X1R2Bx30LED 4000K G2 PC 1950LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417983
Rated voltage [V] 230
Active power [W] 12
Power factor ≥0.88
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 1.4
Total initial brut LED/net luminaire flux [lm] 1950
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R2BX30LED 4000K G2 PC 1950LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417993
Rated voltage [V] 230
Active power [W] 12
Power factor ≥0.88
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 1.4
Total initial brut LED/net luminaire flux [lm] 1950
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R4Bx30LED 4000K G2 PC 4323LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417985
Rated voltage [V] 230
Active power [W] 28.5
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.8
Total initial brut LED/net luminaire flux [lm] 4323
Total luminous efficiency[lm/W] 152
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R4Bx30LED 4000K G2 PC 4323LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417995
Rated voltage [V] 230
Active power [W] 28.5
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.8
Total initial brut LED/net luminaire flux [lm] 4323
Total luminous efficiency[lm/W] 152
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R4Bx30LED 4000K G2 PC 4323LM 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418015
Rated voltage [V] 230
Active power [W] 28.5
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.3
Total initial brut LED/net luminaire flux [lm] 4323
Total luminous efficiency[lm/W] 152
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R4Bx30LED 4000K G2 PC 4323LM 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418023
Rated voltage [V] 230
Active power [W] 28.5
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.8
Total initial brut LED/net luminaire flux [lm] 4323
Total luminous efficiency[lm/W] 152
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R4BX30LED 4000K G2 PC 4323LM DALI 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418029
Rated voltage [V] 230
Active power [W] 28.5
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.3
Total initial brut LED/net luminaire flux [lm] 4323
Total luminous efficiency[lm/W] 152
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R4BX30LED 4000K G2 PC 4323LM DALI 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418035
Rated voltage [V] 230
Active power [W] 28.5
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.8
Total initial brut LED/net luminaire flux [lm] 4323
Total luminous efficiency[lm/W] 152
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R5Bx30LED 4000K G2 PC 6330LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417987
Rated voltage [V] 230
Active power [W] 39.3
Power factor ≥0.92
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.7
Total initial brut LED/net luminaire flux [lm] 6330
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R5BX30LED 4000K G2 PC 6330LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417997
Rated voltage [V] 230
Active power [W] 39.3
Power factor ≥0.92
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.7
Total initial brut LED/net luminaire flux [lm] 6330
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R5BX30LED 4000K G2 PC 6330LM 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418017
Rated voltage [V] 230
Active power [W] 39.3
Power factor ≥0.92
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.2
Total initial brut LED/net luminaire flux [lm] 6330
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R5BX30LED 4000K G2 PC 6330LM 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418025
Rated voltage [V] 230
Active power [W] 39.3
Power factor ≥0.92
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.4
Total initial brut LED/net luminaire flux [lm] 6330
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R5BX30LED 4000K G2 PC 6330LM DALI 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418031
Rated voltage [V] 230
Active power [W] 39.3
Power factor ≥0.92
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.2
Total initial brut LED/net luminaire flux [lm] 6330
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X1R5BX30LED 4000K G2 PC 6330LM DALI 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418037
Rated voltage [V] 230
Active power [W] 39.3
Power factor ≥0.92
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.4
Total initial brut LED/net luminaire flux [lm] 6330
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5Bx30LED 4000K G2 PC 8716LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417988
Rated voltage [V] 230
Active power [W] 54.7
Power factor ≥0.97
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.0
Total initial brut LED/net luminaire flux [lm] 8716
Total luminous efficiency[lm/W] 159
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 8716LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417998
Rated voltage [V] 230
Active power [W] 54.7
Power factor ≥0.97
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.0
Total initial brut LED/net luminaire flux [lm] 8716
Total luminous efficiency[lm/W] 159
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 8716LM 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418018
Rated voltage [V] 230
Active power [W] 54.7
Power factor ≥0.97
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.5
Total initial brut LED/net luminaire flux [lm] 8716
Total luminous efficiency[lm/W] 159
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 8716LM 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418026
Rated voltage [V] 230
Active power [W] 54.7
Power factor ≥0.97
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.7
Total initial brut LED/net luminaire flux [lm] 8716
Total luminous efficiency[lm/W] 159
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 8716LM DALI 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418032
Rated voltage [V] 230
Active power [W] 54.7
Power factor ≥0.97
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.5
Total initial brut LED/net luminaire flux [lm] 8716
Total luminous efficiency[lm/W] 159
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 8716LM DALI 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418038
Rated voltage [V] 230
Active power [W] 54.7
Power factor ≥0.97
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.7
Total initial brut LED/net luminaire flux [lm] 8716
Total luminous efficiency[lm/W] 159
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2x2R5Bx30LED 4000K G2 PC 10100LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417989
Rated voltage [V] 230
Active power [W] 63
Power factor ≥0.98
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.0
Total initial brut LED/net luminaire flux [lm] 10100
Total luminous efficiency[lm/W] 160
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 10100LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417999
Rated voltage [V] 230
Active power [W] 63
Power factor ≥0.98
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.0
Total initial brut LED/net luminaire flux [lm] 10100
Total luminous efficiency[lm/W] 160
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 10100LM 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418019
Rated voltage [V] 230
Active power [W] 63
Power factor ≥0.98
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.5
Total initial brut LED/net luminaire flux [lm] 10100
Total luminous efficiency[lm/W] 160
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 10100LM 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418027
Rated voltage [V] 230
Active power [W] 63
Power factor ≥0.98
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.7
Total initial brut LED/net luminaire flux [lm] 10100
Total luminous efficiency[lm/W] 160
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 10100LM DALI 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418033
Rated voltage [V] 230
Active power [W] 63
Power factor ≥0.98
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.5
Total initial brut LED/net luminaire flux [lm] 10100
Total luminous efficiency[lm/W] 160
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-2X2R5BX30LED 4000K G2 PC 10100LM DALI 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418050
Rated voltage [V] 230
Active power [W] 63
Power factor ≥0.98
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 4.7
Total initial brut LED/net luminaire flux [lm] 10100
Total luminous efficiency[lm/W] 160
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-2X1R2BX30LED G2 662 350 145 111
FIPAD-06-2X1R4BX30LED G2 1272 700 145 111
FIPAD-06-2X1R5BX30LED G2
FIPAD-06-2X2R5BX30LED G2
1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-2x1R5Bx30LED 4000K
G2 PC OPAL
CIE: 44 74 92 93 93
UTE: 0.86E+0.07T, η=93%
UGR ≤22 (8H 4H 0.7/0.5/0.2 UGRtransv 22.5 UGRlong 21.9
Light distribution diagram [Cd/1000lm]

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro