Humidity and dust protected

FIPAD-06-1X1R2/4/5BX30LED G2

The new luminaire FIPAD-06 LED with watertight polycarbonate diffuser is ideal for use in harsh environments where is required protection against vapour, water, and dust.

The opal diffuser ensures the visual comfort and quality of light. Being equipped with medium power LED modules, FIPAD-06 LED offers both reduced power consumption and low maintenance costs giving the possibility of replacement the fluorescent solutions without compromising the colour of the light.

Learn more about the product

The compact and economical design provides perfect integration with the environment. The IP66 protection means for FIPAD-06 LED sealing gasket and stainless steel clips and enable it to be used in damp places such as in industry, warehouses, and sport areas.

Description

  •  Light grey polycarbonate body, UV stable, resistant to impact, dust and moisture.
  • Translucent polycarbonate diffuser for an optimal light distribution.
  • White painted steel sheet gear rail.
  • Polyamide with glass fibre clips that remains attached to the body when the luminaire is open.
  • Polyurethane foam sealing gasket.
  • The luminaire has a connector on one end, and a sealing gasket on the other end.
  • Supply wire diameter: Φ8 ÷ Φ12 mm.
  • Distance part made of polyamide with glass fibre.
  • 3 poles serial terminal.
  • Accessories included in the product: fast connector with 3 poles, screws and stainless steel clips
    and brackets for visible mounting on ceiling, and brackets and stainless steel hooks for suspended
    mounting.
  • Gear (electronic driver) included in the product and manufactured according to the specific
    standards.
  • Colour grey.

Application

General indoor for humid environments with incombustible dust: industrial halls, warehouses, sport areas, workshops. Covered outdoor areas (only under roofs, covers, cupolas that protect the luminaires against solar rays): railway stations, bus stations, waiting halls, garages, underground parkings, subway tunnels, covered storage areas, tunnels, subways, corridors, staircases.) Emergency lighting for evacuation with 2Bx30LED for the variants FIPAD 1200mm, 1500mm+ KIT EM.

Light source

  • Power LEDs, colour temperature or neutral-white 4000K lifetime L80B10 of 60,000 hours at Ta=25 C, CRI≥80.
  • On request the product could be equipped with LEDs with colour temperature cool-white day-light 6500K, CRI: 70 or warm-white 3000K CRI:90.
  • The LED system included in the product could replace or is equivalent with fluorescent lamp T8 Ø26mm, T5 Ø16mm.

Advantages

Economical, compact luminaire designed for use in harsh environments where robustness and performance are key features. Operates exclusively with LED, making it the best option for damp areas. Energy savings. It has easy installation and maintenance. Complies in full with the standards for IP65 protection – provides protection against dust and moisture and has high impact resisance IK08.. Reduced maintenance costs. There are not necessary interventions for lamp replacements during exploitation.

Compliance

Close additional information

Choose model
Name FIPAD-06-1X1R2Bx30LED 4000K G2 PC 1050LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417982
Rated voltage [V] 230
Active power [W] 6
Power factor ≥0.54
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 1.3
Total initial brut LED/net luminaire flux [lm] 1050
Total luminous efficiency[lm/W] 206
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R2Bx30LED 4000K G2 PC 1050LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417992
Rated voltage [V] 230
Active power [W] 6
Power factor ≥0.54
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 1.3
Total initial brut LED/net luminaire flux [lm] 1050
Total luminous efficiency[lm/W] 175
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R4Bx30LED 4000K G2 PC 2600LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417984
Rated voltage [V] 230
Active power [W] 16
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 1.9
Total initial brut LED/net luminaire flux [lm] 2600
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R4Bx30LED 4000K G2 PC 2600LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417994
Rated voltage [V] 230
Active power [W] 16
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 1.9
Total initial brut LED/net luminaire flux [lm] 2600
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R4BX30LED 4000K G2 PC 2600LM 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418014
Rated voltage [V] 230
Active power [W] 16
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.4
Total initial brut LED/net luminaire flux [lm] 2600
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R4BX30LED 4000K G2 PC 2600LM 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418022
Rated voltage [V] 230
Active power [W] 16
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.6
Total initial brut LED/net luminaire flux [lm] 2600
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R4BX30LED 4000K G2 PC 2600LM DALI 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418028
Rated voltage [V] 230
Active power [W] 16
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.4
Total initial brut LED/net luminaire flux [lm] 2600
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R4BX30LED 4000K G2 PC 2600LM DALI 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418034
Rated voltage [V] 230
Active power [W] 16
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.6
Total initial brut LED/net luminaire flux [lm] 2600
Total luminous efficiency[lm/W] 163
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R5Bx30LED 4000K G2 PC 4500LM
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417986
Rated voltage [V] 230
Active power [W] 28
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.3
Total initial brut LED/net luminaire flux [lm] 4500
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R5Bx30LED 4000K G2 PC 4500LM DALI
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23417996
Rated voltage [V] 230
Active power [W] 28
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.3
Total initial brut LED/net luminaire flux [lm] 4500
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R5BX30LED 4000K G2 PC 4500LM 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418016
Rated voltage [V] 230
Active power [W] 28
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.8
Total initial brut LED/net luminaire flux [lm] 4500
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R5BX30LED 4000K G2 PC 4500LM 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418024
Rated voltage [V] 230
Active power [W] 28
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.0
Total initial brut LED/net luminaire flux [lm] 4500
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R5BX30LED 4000K G2 PC 4500LM DALI 1H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418030
Rated voltage [V] 230
Active power [W] 28
Power factor ≥0.93
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 2.8
Total initial brut LED/net luminaire flux [lm] 4500
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

Name FIPAD-06-1X1R5BX30LED 4000K G2 PC 4500LM DALI 3H
Assembly type Suspended, Visible mounted on the ceiling, Visible mounted on the wall
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 23418036
Rated voltage [V] 230
Active power [W] 28
Power factor ≥0.95
Class of protection against
electric shock
I
IK IK08
Weight [Kg] 3.0
Total initial brut LED/net luminaire flux [lm] 4500
Total luminous efficiency[lm/W] 161
Tip produs L(mm) m (mm) l (mm) h  (mm)
FIPAD-06-1X1R2BX30 LED G2 662 350 360 95
FIPAD-06-1X1R4BX30 LED G2 1272 700 145 111
FIPAD-06-1X1R5BX30 LED G2 1572 940 145
111

Technical features

  • Rated voltage: 230V/50Hz.
  • Environment temperature range: -20 ̊C…+ 40 ̊C,  +5 ̊C…+35 ̊C for the variants with emergency lighting  kit(EM)
  • Relative humidity: 80% at the temperature of + 20 ̊C.
  • Mechanical impact resistance: IK08 (IK08 luminaire body, IK09 PC diffuser)
  • Glow wire test: 850° PC body and diffuser; 650° PC body and diffuser
  • Jolt resistance according to SR EN 60068-2-291000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms
  • The luminaire is manufactured according to the requirements of the standard SR EN 60598-1, SR EN 60598-2-1, SR EN 62031.

Variants on request

  • Rated voltage: 230V/50Hz.
  • On request the luminaire could be equipped with:
    • Fast connection kit 2 connectors (male-female)
    • stainless steel clips
    • gear(LED driver) for dimming: analog control, PWM, DALI, DALI DT6, DSI
    • PC body and gear for operating at low temperatures till -25°C.
    • screws for locking the cover against unauthorized opening for both plastic stainless steel clips
  • On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H)/ 3 hours (3H).(EM=emergency) for the variants FIPAD 1200mm, 1500mm + KIT EM.
  • The variant with emergency lighting (EM – emergency) will be available after the finalization of the laboratory tests.
  • The variant with emergency lighting with 1 LED module (EM – emergency):
    • The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
    • Accumulators: Ni-Cd that ensure autonomy in emergency mode of 1 hour / 3 hours.
    • The charging time of the accumulators: 20h
    • On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation.
  • Note: The options could be combined function of the client request.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data FIPAD-06-1x1R2Bx30LED
4000K G2 OPAL
CIE: 44 74 91 92 89
UTE: 0.82E+0.07T, η=89%
UGR <20 (8H 4H 0.7/0.5/0.2 UGRtransv 19.9UGRlong 19.4)
Light distribution diagram [Cd/1000lm]

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro