Architectural lighting

IMPACT-01 LED

IMPACT LED is a range of projectors with vertical distributions, for decorative lighting of architectural objectives, or for accentuation of these through accent lighting.

Due to the recessed housing, during the day the luminaire is unobtrusive and has an elegant appearance. This range of products was designed to offer an optimum effect from down to bottom – from the powerful decorative lighting to subtle effects of highlighting. The unique optical collimating system offers a uniform light distribution.

Learn more about the product

The combination of the last generation LED technology, and the best quality optical systems, made from the IMPACT range of products a completely flexible solution – easy to install no matter the location which creates a perfect lighting effect. The product is available in a variety of colours and optical systems. For applications of dynamic lighting, the luminaire could be used with diverse lighting control systems.

  • Housing made of pressed stainless steel sheet that contains the LEDs plate that equips the product.
  • Nipple for electric cable that allows the use of a cable with a minimum diameter of 9 mm and a maximum of 12 mm. On request could be equipped with two nipples.
  • Flange made of stainless steel.
  • Diffuser made of plane secured glass.
  • The unit LED board contains the LEDs, the specialized optic, and the gear (power supply and controller).
  • For the RBG variant: Through the lighting scenario memorized by the manufacturer there are obtained a large variety of pure and intense colour nuances that changes automatically.
  • The construction of the projector allows the orientation of the luminous flux with ± 15º from the vertical axis.
  • The protection degree IP67 is ensured using a sealing silicon rubber gasket.
  • The unit PVC tube ensures the recessed mounting of the product in soil.
  • The closure of the product is realized by fastening the stainless steel flange on the PVC tube unit, through 6xM5 stainless steel screws.
  • The product is equipped with a condense-proof valve.
  • Gear (electronic driver) included in the product and manufactured according to the specific standards.
  • Colour: black.

 

Application

Decorative accent architectural lighting: buildings, gardens, parks, statues.

Light source

  • Power LEDs colour: white, warm-white for the monochrome variant with static lighting, lifetime L70B50: 30,000 hours at Ta=25oC. Other colours on request.
  • Power LEDs colours: red, green, blue for the RGB variant with dynamic lighting.

Advantages

Reduced power consumption. Longer lifetime. Reduced maintenance costs. There are not necessary interventions for light sources replacements during exploitation. The light source does not contain mercury.

Compliance

Certificat conformitate IMPACT-02 LED

Close additional information

Choose model
Name IMPACT-01 21LED 1 niplu
Assembly type Projectors, Recessed in the floor/ground
Types of gear Ecological products, Efficient, Electronical ballast
Light distribution Adjustable distribution, Direct distribution
Type of lamp LED module
Power from 1 to 20
Number of sources 7, LED module
Level of protection IP67
Product code 34611004
Rated voltage [V] 230
Rated power [W] 25.8
Power factor ≥0.95
Class of protection against electric shock I
IK IK08
Weight [Kg] 6.5
Total initial brut LED flux [lm] 1722
Total luminous efficiency [lm/W] 67 (green)

 

Product type D (mm) h (mm) m (mm)
IMPACT-01 21 LED ø325 417 250

Mounting

  • Recessed in ground according to the mounting and installation instructions.
  • Resistance to the static loading: 1500 kg, according to SR EN 60598-2-13.
  • The temperature on the glass surface: 45oC

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C…+ 35 ̊C
  • Relative humidity: 95% at the temperature of +25 ̊C
  • Resistance to the static loading: 1500 kg, according to SR EN 60598-2-13
  • The temperature on the glass surface: 45oC
  • Saline fog: 96 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-29: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms
  • Mechanical impact resistance: IK08.
  • The level of radio-electric disturbances does not exceed the admitted limits of the standard SR EN 55015/A1.
  • The luminaire is manufactured according to the standards SR EN 60598-1, SR EN 60598-2-13, SR EN 62031.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Date fotometrice IMPACT-01 LED

Photometric data IMPACT-01 21LED GREEN 530nm 12°

Light distribution diagram [Cd/1000lm]

Name IMPACT-01 21LED 2 nipluri
Assembly type Projectors, Recessed in the floor/ground
Types of gear Ecological products, Efficient, Electronical ballast
Light distribution Adjustable distribution, Direct distribution
Type of lamp LED module
Power from 1 to 20
Number of sources 7, LED module
Level of protection IP67
Product code 34611005
Rated voltage [V] 230
Rated power [W] 25.8
Power factor ≥0.95
Class of protection against electric shock I
IK IK08
Weight [Kg] 6.5
Total initial brut LED flux [lm] 1722
Total luminous efficiency [lm/W] 67 (green)

 

Product type D (mm) h (mm) m (mm)
IMPACT-01 21 LED ø325 417 250

 

Mounting

  • Recessed in ground according to the mounting and installation instructions.
  • Resistance to the static loading: 1500 kg, according to SR EN 60598-2-13.
  • The temperature on the glass surface: 45oC

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C…+ 35 ̊C
  • Relative humidity: 95% at the temperature of +25 ̊C
  • Resistance to the static loading: 1500 kg, according to SR EN 60598-2-13
  • The temperature on the glass surface: 45oC
  • Saline fog: 96 hours according to SR EN 60068-2-11.
  • Jolt resistance according to SR EN 60068-2-29: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms
  • Mechanical impact resistance: IK08.
  • The level of radio-electric disturbances does not exceed the admitted limits of the standard SR EN 55015/A1.
  • The luminaire is manufactured according to the standards SR EN 60598-1, SR EN 60598-2-13, SR EN 62031.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Date fotometrice IMPACT-01 LED

Photometric data IMPACT-01 21LED GREEN 530nm 12°

Light distribution diagram [Cd/1000lm]

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro