Architectural lighting

IMPACT-02 LED

IMPACT LED is a range of projectors with vertical distributions, for decorative lighting of architectural objectives, or for highlight through accent lighting.

Due to the recessed housing, during the day the luminaire is unobtrusive and has an elegant appearance. This range of products was designed to offer an optimum lighting effect from down to bottom – from the powerful decorative lighting to subtle effects of highlighting. The unique optical collimating system offers a uniform light distribution.

Learn more about the product

The combination between the last generation LED technology, and the best quality optical systems, made the IMPACT range of products a complete flexible solution – easy to install no matter the location which creates a perfect light effect. The product is available in a variety of colours and optical systems. For applications of dynamic lighting the luminaire could be used with diverse lighting control systems.

  • The projector is a dynamic multicolour power LED projector.
  • The projector could be made both in the RGB variant with dynamic lighting, and in the monochrome variant with all LEDs of the same colour and static lighting.
  • Through the lighting scenario memorized by the manufacturer there are obtained a large variety of pure and intense colour nuances that changes automatically.
  • The unit LED board contain the LEDs, the specialised optic, and the gear (the power source and the controller).
  • The housing made of pressure cast aluminium, contains the serial terminal, the earthing terminal, and the unit LEDs-board that equipped the product.
  • Nipple for electric cables that allows the use of a cable with a maximum 10 mm diameter.
  • Diffuser made of secured glass.
  • The unit PVC tube ensures the recessed mounting of the product in soil.
  • Stainless steel flange.
  • The closure of the product is realised by fastening the stainless steel flange on the PVC tube unit, through 6xM5 stainless steel screws.
  • The IP67 degree of protection is ensured by using a sealing nitrile rubber gasket.
  • Gear (electronic driver) included in the product and manufactured according to the specific standards.
  • Colour: grey, metallic (stainless steel flange).

Application

Outdoor architectural accent lighting: buildings, gardens, parks, statues.

Light source

  • Power LEDs: red, green, blue for the RGB dynamic lighting.
  • Power LEDs: white, warm-white, for the monochrome variant with static light. On request other colours.
  • The use of LEDs ensures both a long lifetime L70B50 of 30.000 hours at Ta=25 C, and economical power consumption.

Advantages

Low power consumption. Long lifetime. Reduced maintenance costs. There are not necessary interventions for light source replacements. The light source does not contain mercury.

Compliance

Certificat conformitate IMPACT-02 LED

Close additional information

Choose model
Name IMPACT-02 9LED RGB Dinamic
Assembly type Projectors, Recessed in the floor/ground
Types of gear Ecological products, Efficient, Electronical ballast
Light distribution Direct distribution
Type of lamp LED module
Power from 1 to 20
Number of sources 1, LED module
Level of protection IP67
Product code 78350003
Rated voltage [V] 230
Active power [W] 11
Class of protection against electric shock I
IK IK10
Weight [Kg] 3.6
Total initial brut LEDs flux [lm] dynamic RGB
Total luminous efficiency [lm/W] dynamic RGB

 

Product type D (mm) h (mm)
IMPACT-02 9 LED ø218 254

Mounting

  •  Recessed in ground according to the mounting and installation instructions.

Variants on request

  • The projector could be made in the monochrome variant with all LEDs of the same colour and static lighting.

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C…+ 35 ̊C
  • Mechanical impact resistance: IK10.
  • Relative humidity: till 80% at the temperature of + 20 ̊C.
  • Saline fog: 96 hours according to SR EN 60068-2-11.
  • The temperature on the glass surface: 45oC
  • Resistance to the static loading: 1500 kg, according to SR EN 60598-2-13
  • Jolt resistance according to SR EN 60068-2-29: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms.
  • Saline fog: 96 hours according to SR EN 60068-2-11.
  • The level of radio-electric disturbances does not exceed the admitted limits of the standard SR EN 55015/A1.
  • Vibration resistance: amplitude -1,5mm; frequency 4÷10Hz; duration -2 hours; duration of movement: 30 seconds.
  • The luminaire is manufactured according to the standards SR EN 60598-1, SR EN 60598-2-13, SR EN 62031.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive
ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro