Signaling and emergency lighting

LB-LED

The obstruction light LB-LED is a signal luminaire designed for light marking (beaconage) of fixed high objects (aerials, communications towers, stacks etc.), in order to avoid the collision of the flying vehicles with these aerial obstacles.

Type: Low-intensity obstacle light Type A – over 10cd. Steady burning obstruction light.

Learn more about the product

  • The beacon is equipped with light sources with reduced power consumption and extremely long lifetime: 4 power LEDs with lifetime till 100000 hours. There are not necessary interventions during exploitation for light sources replacement.
  • There is not necessary to dismantle the product in order to connect it to the power supply or for maintenance.
  • The product is equipped with terminals for distance connection of a green LED, for signalling the proper operating.
  • The body and the red filter are made of UV and solar radiation resistant polycarbonate.
  • The function of a double-lamp is ensured by special measures of protection and safety in functioning:
    • Each of the four LEDs has an independent electronic circuit for power supply.
    • The damaging of a LED or an electronic component from the supplying circuit does not compromise the functioning of the other LEDs. Such a failure is signalled at distance by turning off the control green LED.
    • With three LEDs that remain operating there are still ensured the photometric requirements corresponding to an obstacle lamp type A (minimum 10cd).
  • Exterior cable diameter exterior: 6..14mm
  • The cable for the signalling LED: minimum section 1mm2, maximum length 25m.
  • Colour: grey, diffuser: red.

Application

Luminous beacon to mark during the night any obstacle that may present hazard to aircraft navigation. It can be mounted on buildings being at up to 3000 m altitude. Compliance with The International Civil Aviation Organization – ICAO Aerodromes Annex 14 Volume I, Chapter 6, Edition July 2004: Obstacle light Type A (fixed obstacle) with luminous intensity of 10cd (+6°…+10° starting from the horizontal plane), the vertical aperture of the fascicle >10°. The horizontal distribution angle of the luminous intensity is of 360° (omnidirectional light).

The beacon luminaire LB-LED covers the function of a double-lamp.

Light sources

  • Side emitting LEDs with a lifetime L70B50 of 50000 hours (that means 14 years of 10 hours/day operating time)
  • The light source emits a viation red light with the wavelength λ=625nm.

Compliance

Certificat 347-lb-led

Close additional information

Choose model
Name LB-LED 48V
Assembly type On poles, Recessed, Visible mounted on the ceiling
Types of gear Ecological products, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Filters colour red
Product code 46614001
Rated voltage [V] 48Vca ±10%
Rated power [W] 14.3
Class of protection against electric shock II
Weight [Kg] 2,20
Mounting accessories collar or flange

 

Product type L (mm) m (mm) h (mm) n (mm)
LB-LED 172 70 186 60

 

Technical features

  • Rated voltage: 48Vca/50Hz (variant for 230V/50Hz).
  • Surrounding temperature: -40°C ÷+40°C (IEC60068-2-2, IEC60068-2-14).
  • Relative humidity: till 80% at the temperature of + 20 ̊C.
  • Saline fog: 48 hours according to IEC 60068-2-11.
  • Mechanical vibration: 30Hz, acceleration 0.5g, during two hours (IEC60068-2-6) Mechanical impact resistance: IK08 according to SR EN 50102
  • The luminaire is manufactured according to the requirements of the luminaire standard SR EN 60598-1.

Mounting

  • The product allows both the mounting with a collar on a pipe with the external diameter of Ø30mm, or with fastening on a vertical flange through four screws M6x45.
  • It can be mounted on buildings being at up to 3000 m altitude.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data LB-LED
Light distribution [Cd]

LB LED is an Obstacle light Type A (fixed obstacle) with luminous intensity of 10cd (+6°…+10° starting from the horizontal plane), the vertical aperture of the fascicle >10°. The horizontal distribution angle of the luminous intensity is of 360° (omnidirectional light).
The adequate photometric performances correspond to Obstacle light Type A are ensured even when one LED is not functioning.

The light source emittes aviation red light with the wavelenght λ=625nm.

Name LB-LED 230V
Assembly type On poles, Recessed, Visible mounted on the ceiling
Types of gear Ecological products, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp LED module
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Filters colour red
Product code 46614002
Rated voltage [V] 230Vca±10%
Rated power [W] 14.3
Class of protection against electric shock II
Weight [Kg] 2,20
Mounting accessories Collar or flange

 

Product type L (mm) m (mm) h (mm) n (mm)
LB-LED 172 70 186 60

 

Technical features

  • Rated voltage: 48Vca/50Hz (variant for 230V/50Hz).
  • Surrounding temperature: -40°C ÷+40°C (IEC60068-2-2, IEC60068-2-14).
  • Relative humidity: till 80% at the temperature of + 20 ̊C.
  • Saline fog: 48 hours according to IEC 60068-2-11.
  • Mechanical vibration: 30Hz, acceleration 0.5g, during two hours (IEC60068-2-6) Mechanical impact resistance: IK08 according to SR EN 50102
  • The luminaire is manufactured according to the requirements of the luminaire standard SR EN 60598-1.

Mounting

  • The product allows both the mounting with a collar on a pipe with the external diameter of Ø30mm, or with fastening on a vertical flange through four screws M6x45.
  • It can be mounted on buildings being at up to 3000 m altitude.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data LB-LED
Light distribution [Cd]

LB LED is an Obstacle light Type A (fixed obstacle) with luminous intensity of 10cd (+6°…+10° starting from the horizontal plane), the vertical aperture of the fascicle >10°. The horizontal distribution angle of the luminous intensity is of 360° (omnidirectional light).
The adequate photometric performances correspond to Obstacle light Type A are ensured even when one LED is not functioning.

The light source emittes aviation red light with the wavelenght λ=625nm.

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro