Architectural lighting

RONDO-01 9LED

The RONDO-01 LED projector is designed for architectural lighting and it is the LED solution that provides the opportunity to obtain attractive decorative lighting effects with little effort.

Being equipped with an LED high performance module, RONDO-01 LED is energy efficient, which minimises its impact on the environment.

Learn more about the product

The product is available both in the monochrome variant with static lighting, and in the RGB variant with dynamic lighting, in a range varied range of colours and optical systems. For dynamic lighting applications the luminaire could be used together with diverse lighting control systems.

A multicolour projector with 9 power LEDs.

  • The product could be manufactured both in the monochrome variant (all LEDs have the same colour) with static lighting and in the RGB variant with dynamic lighting.
  • Through the lighting scenario memorized by the manufacturer there are obtained tens of pure and intense colour nuances that changes automatically.
  • The housing made of pressure cast aluminium, contains the serial terminal, the earthing terminal, and the unit LEDs-board that equipped the product.
  • Nipple for electric cables that allows the use of a cable with a maximum 10 mm diameter.
  • Pressure cast aluminium frame.
  • Diffuser made of plane secured glass.
  • The unit LEDs-board contains both the LEDs and the specialised lenses, and the gear (the power source and the controller).
  • The protection degree IP66, of the product is ensured by using a nitrile rubber sealing gasket.
  • The fastening of the frame on the housing is realised through three M5 stainless steel screws.
  • The protection through painting is realised with polyester powders. Gear (electronic driver) included in the product and manufactured according to the specific standards.
  • Colour: grey.

Application

Outdoor architectural lighting: facades of buildings, gardens, parks, statues. Ambient lighting: discos, clubs, bars.

Light source

  • Power LEDs in colour red, green and blue for the variant RGB with dynamic lighting.
  • Power LEDs with lifetime L70B50: 50,000 hours at Ta=25 C, in colour white or different colours for the variant static monochrome, with the following available light distributions: 12o, 19o, 34o, 58o.
  • The use of LEDs ensures both a long life time and reduced power consumption.

Advantages

Reduced energy consumption. Longer lifetime. Easy installation. Environmentally friendly. Reduced maintenance costs. There are not necessary interventions for light sources replacements during exploitation. The light source does not contain mercury.

Compliance

352-rondo-01-led-certificate

Close additional information

Choose model
Name RONDO-01 9x1W LED RGB
Assembly type On poles, Projectors, Recessed, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Ecological products, Electronical ballast, Standard
Light distribution Direct distribution
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 35617011
Rated voltage [V] 230
Rated power [W] 9×1
Class of protection against electric shock I
Weight [Kg] 2,0
Total initial brut LED flux [lm] dynamic

 

Product type D (mm) L (mm) l (mm) m (mm)
RONDO-01 9 LED ø163 170 172 70

 

 

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature:-20 ̊C ÷ + 35 ̊C
  • Average relative humidity until 80% at the average temperature of + 20 ̊C
  • Saline fog: 96 hours according to SR EN 60068-2-11
  • Jolt resistance: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms, according to SR EN 60068-2-29
  • The level of radio-electric disturbances does not exceed the limits of the standard SR EN 55015:2001/A1
  • Vibration resistance test: amplitude -1,5mm; frequency -4÷10Hz; duration -2 hours; duration of scavenging: 30sec.
  • Mechanical impact resistance: IK06 (with plane secured glass).
  • The luminaire is manufactured according to the standards SR EN 60598-1, SR EN 60598-2-5, and SR EN 62031

Mounting

  • Function of the requested constructive variant, the projector could be mounted on a certain surface, through the mounting frame (using two M10 screws), or on a bracket, with the diameter of maximum 60mm, through a fastening system delivered with the product.
  • The body of the projector could be tilted (oriented) on the vertical plane by unscrewing the fastening screws that fasten the frame on the body (M8). That realises the aiming of the luminous flux to the area that must be lighted.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive
Name RONDO-01 9x1W LED monochrome
Assembly type On poles, Projectors, Recessed, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Ecological products, Electronical ballast, Standard
Light distribution Direct distribution
Power from 1 to 20
Number of sources LED module
Level of protection IP66
Product code 35617026
Rated voltage [V] 230
Rated power [W] 9×1
Class of protection against electric shock I
Weight [Kg] 1,9
Total initial brut LED flux [lm] 1026
Product type D (mm) L (mm) l (mm) m (mm)
RONDO-01 9 LED ø163 170 172 70

 

 

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature:-20 ̊C ÷ + 35 ̊C
  • Average relative humidity until 80% at the average temperature of + 20 ̊C
  • Saline fog: 96 hours according to SR EN 60068-2-11
  • Jolt resistance: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms, according to SR EN 60068-2-29
  • The level of radio-electric disturbances does not exceed the limits of the standard SR EN 55015:2001/A1
  • Vibration resistance test: amplitude -1,5mm; frequency -4÷10Hz; duration -2 hours; duration of scavenging: 30sec.
  • Mechanical impact resistance: IK06 (with plane secured glass).
  • The luminaire is manufactured according to the standards SR EN 60598-1, SR EN 60598-2-5, and SR EN 62031

Mounting

  • Function of the requested constructive variant, the projector could be mounted on a certain surface, through the mounting frame (using two M10 screws), or on a bracket, with the diameter of maximum 60mm, through a fastening system delivered with the product.
  • The body of the projector could be tilted (oriented) on the vertical plane by unscrewing the fastening screws that fasten the frame on the body (M8). That realises the aiming of the luminous flux to the area that must be lighted.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive
ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro