Architectural lighting

RONDO-01

The projector RONDO-01 is designed for architectural lighting and it is the solution that ensures the opportunity to obtain attractive decorative lighting effects.

Being equipped with high performance lamps and parabolic reflectors, RONDO is energy efficient and has a positive impact on the environment. The product is available in the variant with reflector and different optical systems an in the variant with a range of colours.

Learn more about the product

  • Pressure cast aluminium body, that contains: the serial terminal, the earthing terminal, and the adequate socket for the type of lamp that will be mounted in the product.
  • Nipple for electric cables that allows the use of a cable with a maximum 10 mm diameter.
  • Pressure cast aluminium frame.
  • Diffuser that could be made of plane clear secured glass, or clear glass with striae.
  • The reflector is made of aluminium sheet for the variant that will be equipped with lamps type CDM- R 35W. For the variants that will be equipped with CDM-TC-35W (70W) lamps, respectively CDM-Tm 20W lamps, the products are equipped with aluminised parabolic reflectors, providing high photometric performances.
  • The ingress protection IP66 of the optical unit is ensured using a nitrile rubber sealing gasket (silicone for the variant of 70W).  The fastening of the frame on the housing is realised through three M5 stainless steel screws.
  • Function of the constructive requested variant (the type of lamp for the product), the projector could be equipped with a gear box with an ingress protection IP65.
  • The protection through painting is realised with polyester powders.
  • The product is delivered with 1.5m cable between the optical unit and the gear box.
  • Gear (for the variants for metal halide lamps) included in the product and manufactured according to the specific standards.
  • Colour: grey.

Application

Outdoor architectural lighting.

Light source

  • Incandescent lamps PAR38-80W with different colours (red, yellow, blue, green), socket E27.
  • Halogen lamps type PAR 38 Halogen 75-100W, socket E27.
  • Metal halide lamp type CDM-R 35W, socket E27.
  • Metal halide lamp type CDM-TC 35W, socket G8.5
  • Metal halide lamp type CDM-TC 70W, socket G8.5
  • Metal halide lamp type CDM-Tm 20W, socket GJ5

Compliance

Certificat conformitate RONDO-01

Close additional information

Choose model
Name RONDO-01-80W
Assembly type On poles, Projectors, Recessed, Visible mounted on the ceiling, Visible mounted on the wall
Light distribution Direct distribution
Type of lamp Halogen lamps, PAR38 (G27)
Power from 20 to 100
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 80
Class of protection against electric shock I
Weight [Kg] 2,3

 

Product type D (mm) L (mm) l (mm) m (mm)
RONDO-01 9 LED ø163 170 172 70

 

 

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C ÷ + 35 ̊C
  • Relative humidity until 80% at the average temperature of + 20 ̊C Saline fog: 96 hours according to SR EN 60068-2-11
  • Jolt resistance: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms, according to SR EN 60068-2-29
  • The level of radio-electric disturbances does not exceed the limits of the standard SR EN 55015:2001/A1
  • Vibration resistance test: amplitude -1,5mm; frequency -4÷10Hz; duration -2 hours; duration of scavenging: 30sec.
  • Mechanical impact resistance: IK06 for the variant with plane secured glass, respectively IK03 for the variant with clear glass with striae
  • The luminaire is manufactured according to the standards :SR EN 60598-1, SR EN 60598-2-5

Mounting

  • Function of the requested constructive variant, the projector could be mounted on a certain surface through the mounting frame (using two screws M10) or on a bracket, with the diameter of maximum 60mm, through a fastening system delivered with the product.
  • The housing of the projector could be tilted (oriented), on the vertical plane, by unscrewing the fastening screws that fasten the frame on the body (M8). That realises the orientation of the luminous flux to the area that must be illuminated.

Variants on request

  • On request the product can be equipped with other cable lengths of max. 2m between the optical unit and the gear box.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data for RONDO 01

Photometric data RONDO-01-35W (CDM-R) Glass with striae diffuser
(1⁄2Imax 6°=2×3°)
L.O.R.:76%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM- TC) Plane secured glass diffuser
(1⁄2Imax 5.6°=2×2.8°)
L.O.R.:67%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM-TC) Plane secured glass diffuser Large Distribution (DL)
(1⁄2Imax 44.4°=2×22.2°)
L.O.R.:69%
Light distribution diagram [Cd/1000lm]

Name RONDO-01-20W
Assembly type On poles, Projectors, Recessed, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Ecological products, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp CDM-Tm (PG J 5), Metallic halogen lamps
Power from 20 to 100
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 20
Class of protection against electric shock I
Weight [Kg] 2,3

 

Product type D (mm) L (mm) l (mm) m (mm)
RONDO-01 9 LED ø163 170 172 70

 

 

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C ÷ + 35 ̊C
  • Relative humidity until 80% at the average temperature of + 20 ̊C Saline fog: 96 hours according to SR EN 60068-2-11
  • Jolt resistance: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms, according to SR EN 60068-2-29
  • The level of radio-electric disturbances does not exceed the limits of the standard SR EN 55015:2001/A1
  • Vibration resistance test: amplitude -1,5mm; frequency -4÷10Hz; duration -2 hours; duration of scavenging: 30sec.
  • Mechanical impact resistance: IK06 for the variant with plane secured glass, respectively IK03 for the variant with clear glass with striae
  • The luminaire is manufactured according to the standards :SR EN 60598-1, SR EN 60598-2-5

Mounting

  • Function of the requested constructive variant, the projector could be mounted on a certain surface through the mounting frame (using two screws M10) or on a bracket, with the diameter of maximum 60mm, through a fastening system delivered with the product.
  • The housing of the projector could be tilted (oriented), on the vertical plane, by unscrewing the fastening screws that fasten the frame on the body (M8). That realises the orientation of the luminous flux to the area that must be illuminated.

Variants on request

  • On request the product can be equipped with other cable lengths of max. 2m between the optical unit and the gear box.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data for RONDO 01

Photometric data RONDO-01-35W (CDM-R) Glass with striae diffuser
(1⁄2Imax 6°=2×3°)
L.O.R.:76%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM- TC) Plane secured glass diffuser
(1⁄2Imax 5.6°=2×2.8°)
L.O.R.:67%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM-TC) Plane secured glass diffuser Large Distribution (DL)
(1⁄2Imax 44.4°=2×22.2°)
L.O.R.:69%
Light distribution diagram [Cd/1000lm]

Name RONDO-01-35W
Assembly type On poles, Projectors, Recessed, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp CDM-R, CDM-TC (G 8.5), Metallic halogen lamps
Power from 20 to 100
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 35
Class of protection against electric shock I
Weight [Kg] 3,5

 

Product type D (mm) L (mm) l (mm) m (mm)
RONDO-01 9 LED ø163 170 172 70

 

 

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C ÷ + 35 ̊C
  • Relative humidity until 80% at the average temperature of + 20 ̊C Saline fog: 96 hours according to SR EN 60068-2-11
  • Jolt resistance: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms, according to SR EN 60068-2-29
  • The level of radio-electric disturbances does not exceed the limits of the standard SR EN 55015:2001/A1
  • Vibration resistance test: amplitude -1,5mm; frequency -4÷10Hz; duration -2 hours; duration of scavenging: 30sec.
  • Mechanical impact resistance: IK06 for the variant with plane secured glass, respectively IK03 for the variant with clear glass with striae
  • The luminaire is manufactured according to the standards :SR EN 60598-1, SR EN 60598-2-5

Mounting

  • Function of the requested constructive variant, the projector could be mounted on a certain surface through the mounting frame (using two screws M10) or on a bracket, with the diameter of maximum 60mm, through a fastening system delivered with the product.
  • The housing of the projector could be tilted (oriented), on the vertical plane, by unscrewing the fastening screws that fasten the frame on the body (M8). That realises the orientation of the luminous flux to the area that must be illuminated.

Variants on request

  • On request the product can be equipped with other cable lengths of max. 2m between the optical unit and the gear box.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data for RONDO 01

Photometric data RONDO-01-35W (CDM-R) Glass with striae diffuser
(1⁄2Imax 6°=2×3°)
L.O.R.:76%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM- TC) Plane secured glass diffuser
(1⁄2Imax 5.6°=2×2.8°)
L.O.R.:67%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM-TC) Plane secured glass diffuser Large Distribution (DL)
(1⁄2Imax 44.4°=2×22.2°)
L.O.R.:69%
Light distribution diagram [Cd/1000lm]

Name RONDO-01-70W
Assembly type On poles, Projectors, Recessed, Visible mounted on the ceiling, Visible mounted on the wall
Types of gear Ecological products, Electronical ballast, Standard
Light distribution Direct distribution
Type of lamp CDM-TC (G 8.5), Metallic halogen lamps
Power from 20 to 100
Number of sources 1
Level of protection IP66
Rated voltage [V] 230
Rated power [W] 70
Class of protection against electric shock I
Weight [Kg] 2,3

 

Product type D (mm) L (mm) l (mm) m (mm)
RONDO-01 9 LED ø163 170 172 70

 

 

Technical features

  • Rated voltage: 230V/50Hz
  • Environment temperature: -20 ̊C ÷ + 35 ̊C
  • Relative humidity until 80% at the average temperature of + 20 ̊C Saline fog: 96 hours according to SR EN 60068-2-11
  • Jolt resistance: 1000 ±10 jolts, acceleration of 10g, duration of impulse: 16ms, according to SR EN 60068-2-29
  • The level of radio-electric disturbances does not exceed the limits of the standard SR EN 55015:2001/A1
  • Vibration resistance test: amplitude -1,5mm; frequency -4÷10Hz; duration -2 hours; duration of scavenging: 30sec.
  • Mechanical impact resistance: IK06 for the variant with plane secured glass, respectively IK03 for the variant with clear glass with striae
  • The luminaire is manufactured according to the standards :SR EN 60598-1, SR EN 60598-2-5

Mounting

  • Function of the requested constructive variant, the projector could be mounted on a certain surface through the mounting frame (using two screws M10) or on a bracket, with the diameter of maximum 60mm, through a fastening system delivered with the product.
  • The housing of the projector could be tilted (oriented), on the vertical plane, by unscrewing the fastening screws that fasten the frame on the body (M8). That realises the orientation of the luminous flux to the area that must be illuminated.

Variants on request

  • On request the product can be equipped with other cable lengths of max. 2m between the optical unit and the gear box.

Compliance with the European Directives

  • Low Voltage Directive
  • Electromagnetic Compatibility Directive
  • RoHS Directive, WEEE Directive

Photometric data for RONDO 01

Photometric data RONDO-01-35W (CDM-R) Glass with striae diffuser
(1⁄2Imax 6°=2×3°)
L.O.R.:76%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM- TC) Plane secured glass diffuser
(1⁄2Imax 5.6°=2×2.8°)
L.O.R.:67%
Light distribution diagram [Cd/1000lm]

Photometric data RONDO-01-70W (CDM-TC) Plane secured glass diffuser Large Distribution (DL)
(1⁄2Imax 44.4°=2×22.2°)
L.O.R.:69%
Light distribution diagram [Cd/1000lm]

ELBA SA

135 Paul Morand, Freidorf Industrial Park Timișoara, Timiș, Romania

Telephone +40 356 443 902
E-mail office@elba.ro