Description
The body and cover are made from pressure-cast aluminum, smooth, without grooves, painted in electrostatic field.
Mounting system with integrated stub for pole or arm mounting, indexable 0-20°, with a 5° step: 0°, 5°, 10°, 15°, 20°.
Transparent diffuser, made from tempered, heat-treated flat glass, which shatters into pieces when broken. The glass is fixed with screws.
Optical System:
- Designed to meet the SR EN 13201 standard for street lighting, it includes high-power LEDs with a light flow orientation system made from PMMA, with an asymmetric distribution, the same for each LED, specialized for street lighting or large spaces, pedestrian walkways, intersections, and pedestrian crossings depending on the variant.
- The light distribution will not be affected by defects on any LED, as it is uniform for each LED.
- Number of LEDs: 24, 48, 64, 80 depending on the variant.
- The total luminous flux of the lighting unit is determined by the number of LEDs and/or the current supplied to the LEDs.
- The LED board is removable, fixed directly onto the body for low thermal resistance, with the housing also acting as a radiator.
Optical and Driver Compartments:
The optical compartment is separate from the driver compartment, and both can be easily and quickly opened with clamps for maintenance or to replace equipment after the warranty.
LED Driver:
- Compatible with the type of LED used, with adjustable flux (dimmable), programmable, DALI,
- System for maintaining constant luminous flux (CLO – Constant Lumen Output),
- Enables communication with control system components through the DALI protocol,
- Allows reducing the luminous flux by up to 75% of the nominal flux in 1% steps,
- Ensures the constant luminous flux of LED sources over time through the control system.
Protections:
- Thermal protection, LED module equipped with a thermistor, NTC (DRIVER),
- Surge protection inside (surge protection): L-N, 10kV,
- Short-circuit protection.
Color: Gray, or other RAL colors upon customer request.
Field of Use:
Street lighting for main roads, local roads, secondary roads, with lighting classes ME2, ME3, ME4, ME5, ME6, S1-S6 according to SR EN 13201. Residential lighting for alleys, sidewalks, parks, pedestrian crossings, parking lots, train stations, bus stations, large public spaces, etc.
Light Source:
CREE high-power LEDs, with a specialized optical system for street and residential lighting, with a color temperature of warm-white (3000K), CRI ≥80, or neutral-white (4000K), CRI ≥80, with a long lifespan, at Ta = 25ºC L80B10 > 115,890 hours.
Upon request, available with cool-white (5700K), 5000K, CRI ≥70, neutral-white (4000K), or warm-white (3000K), CRI ≥70.
The included LED system replaces / is equivalent to:
- APOLLO-01 LED: HME mercury vapor lamps 80W, 125W, TC-L 36W 2x24W compact fluhoursscent lamps, HST sodium vapor lamps 50W, 70W, 100W, HIT metal halide lamps 70W.
Variants on Request:
- LED with cool-white color temperature (5700K, 5000K, CRI ≥70), neutral-white 4000K, or warm-white 3000K, CRI ≥70.
- Product can be equipped with a transparent polycarbonate (PC) vandal-resistant diffuser, IK10.
- Other RAL colors for the housing upon customer request.
- Option to equip with a motion sensor 16mA DALI:
- TVI light CitySense
- FDP-301 DALI
– The sensor can be added to the luminaire later
Advantages
A modern lighting fixture with LED light sources. Low energy consumption. Extended lifespan. Environmentally friendly. Ideal for replacing street lighting fixtures with compact fluhoursscent lamps, sodium lamps, and metal halide lamps. Reduced maintenance costs. No interventions required for replacing light sources during operation.
Compliance
