- General info
- Technical Info
- Photometric Data
- Files
LB-LED 48V
Mounting type: On poles, Surface-mounted, Surface-mounted on the wall
Type of Equipment: Eco-Friendly Products, Electronic Ballast, Standard
Light Distribution: Direct distribution
Lamp Type: LED module
Light Power: From 1 to 20
Number of Lamps: LED Module
Protection Rating: IP66
Tip produs |
L (mm) |
m (mm) |
h (mm) |
n (mm) |
LB-LED |
172 |
70 |
186 |
60 |
Technical Characteristics
- Power supply: 48VAC/50Hz (variant for 230V/50Hz).
- Ambient temperature: from -40°C to +40°C (IEC60068-2-2, IEC60068-2-14).
- Relative humidity: up to 80% at +20°C.
- Salt fog: IEC 60068-2-11.
- Mechanical vibrations: 30Hz, 0.5g acceleration, for two hours (IEC60068-2-6).
- Mechanical shocks: IK08 according to SR EN 50102.
- The lighting fixture is manufactured in compliance with the requirements of SR EN 60598-1 standards.
Installation
The product allows both clamping on a Φ30 pipe and mounting on a vertical flange using 4 M6x45 screws.
Photometric Data LB-LED
Light Distribution Diagram [Cd]
The LB-LED beacon light is a Type A beacon lamp with a luminous intensity of 10cd (+6°…+10° from the horizontal plane), a vertical beam width >10°, and a horizontal luminous intensity distribution angle of 360°.
Photometric performance corresponding to the “Low-Intensity Type A Lamp” category is maintained even if one LED is not operational.
The source emits aviation red light with a wavelength of λ=625nm.