The projector has a simple, robust design, making it easy to install and maintain.
The projector housing is made of steel sheet, welded construction, powder-coated with epoxy polyester.
Optical compartment (reflector made of mirrhoursd sheet metal, LED modules, with/without optical system for light distribution), steel frame supporting the diffuser.
The diffuser is made of thermally tempered glass, protecting the optical compartment.
Depending on the optical system, narrow or wide light distributions can be achieved:
70×25º (between shelves), 38º (narrow), 72º (medium), 96º (wide).
The product has a thermal management system, consisting of a passive aluminum heat sink, to ensure a long lifespan.
Quick connector with IP68 protection rating.
Electrical components (electronic driver) are included in the product and meet the relevant standards, mounted on the housing with an IP65 protection rating.
Driver protection features: overcurrent, overvoltage, short circuit, overheating (Overload protection, Over voltage, Short circuit, Over temperature).
Lightning protection: minimum 4kV (Light Industry level – surge 4kV).
Color: Gray.
Field of Use
General interior or exterior covered lighting (under canopy, roof) for rooms or spaces with medium/high ceilings (up to 6-8m/10-14m): industrial halls, sports halls, commercial spaces, gas stations, etc. Upon request, can be used for safety-evacuation lighting.
Light Source Used
• High-power white LEDs, neutral white color temperature (4000K), CRI ≥70, with a long lifespan L80B10, over 50,000 hours at Ta=25ºC, providing low energy consumption and wide light distribution.
Upon customer request, products can also be equipped with LEDs with cool white color temperature (5700K), CRI ≥70.
Equivalence: Can replace projectors with lamps such as: mercury vapor HME 250W, metal halide HIT 100W, sodium vapor HST, HSE 100W.
Advantages
Reduced energy consumption, extended lifespan, easy installation, environmentally friendly, low maintenance costs. No need for intervention to replace the light sources during operation.
Compliance